SabbirNetworking

Hi guys I’m going to show you how to use wind box so in my previous tutorial we are downloaded wind box and you are use it to do the initial configuration of your rotor so I’m going to just give you a walk tool and show you some of the features of wind box and some of the things that you can do with it so when you open wind box it allows you to connect so there’s fee that say connect to so this is where you would put the ip address or the mac address of your roll of the rotor that you’re connecting to and so let us just look around interface so here’s a tab that says manage so these are really if you are if there’s was a list here to show these lists would contain the rotor data that is under your management but I’m going to show you how to add those so say for instance you have the rotor 1 n 2 that 168 that’s 5.1 and this was one of the rotor dock you’re managing and you want to save that so you can access it the next time you could click add and set and what it will do is put it her...

Hello welcome to part one of the mikrotik configuration series and I'm going to show you how to do the initial configuration of your router but before you start  you start configuring it , I'm going to show you how to connect your router to  your pc. so on the back of your router there are number of ports you will be connectiong your ethernet coble into port any port from two to five to do the initial configuration. The reason why we are not going to use port one is that port one by default is not allowed to configure the router because it's blocked because of firewall so there's a firewall rule that is in a router that will prevent the router from being configured on port one. You need to plug your ehternet cable into any port 2,3,4or 5 and other end of your cable you'll be plugging that into your pc or your laptop and then you connect the your power cable into the power jack and power up your router. next I'm going to show you how to do the initial c...